Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Headsets

$214.99
Cane Creek's AngleSet transforms your ride. It enables an effective head-tube angle adjustment of up to +/- 1.5-degrees so you can fine-tune your mountain bike's front-end handling to best suit your riding style, local terrain and race course. Installation is straightforward because the AngleSet automatically adjust to fit different head tube lengths and angles. All AngleSet headsets have light, tough, and beautiful machined 7075 T6-aluminum cups with Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out.
$175.99
Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. - Sealed stainless steel bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - 7075 T-6 aluminum cups machined in Fletcher, NC - Aluminum dual seal crown race protects lower bearing - Interlok spacer compatible - 110 year warranty
$175.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 Series headsets. This is a tapered headset intended for forks that require a 44mm top headtube diameter, and a 56mm bottom headtube diameter. T - Technical Description: ZS44/28.6/H8/K|ZS44/30/H4/x - Top Type: ZS - ZeroStack - Top Head Tube Inside Dia.: 44.00mm - Stem Clamp Dia.: 28.6mm - Top Stack Height: 8mm - Top Bearing Type: Top-quality, sealed stainless steel bearings - Bottom Type: ZS - ZeroStack - Bottom Head Tube Inside Dia.: 55.95mm - Crown Race Seat Dia.: 39.79mm - Crown Race Type: Aluminum, Dual-Seal - Bottom Stack Height: 4mm - Bottom Bearing Type: Top-quality, sealed stainless steel bearings - Material: 7075 aluminum - Weight: 88.47g
$159.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 110 Series has light, tough, and beautiful machined 7075 T6-aluminum cups that are contoured and relieved for even more gram shaving and strength. You also get top-quality split-lip sealed stainless-steel bearings, a carbon-friendly captured compression ring and a dual-sealed crown race and complete upper bearing seal to keep the grease in and the dirt out. What's more, the seals are low-friction to improve steering performance and there are no loose headset parts so maintenance is easy. The 110 comes with an amazing 110-year, no-questions-asked warranty too!
$143.99
The Absolute Best Well over a decade ago, we set out to make the best premium headset on the market. With our 110 Series, we did just that, utilizing optimal materials, the most effective seals and the best aesthetics. With the flexibility to purchase complete assemblies or separate Tops and Bottoms, tops are available in either short (9mm) or tall (15mm) stack height bearing covers, the 110-Series offers a premium solution for nearly all straight and tapered configurations on the market today. From Integrated (IS) Tops to External Cup (EC) Conversion Bottoms and everything in between, you can mix and match your headset purchase to best meet your needs. - Technical Description: 110-Series IS41/28.6/H9 | IS52/40 - Top Type: IS - Integrated - Top Head Tube Inside Dia.: 41.1mm - Stem Clamp Dia.: 28.6mm - Top Stack Height: 9mm - Top Bearing Type: Top-quality, sealed stainless steel bearings - Bottom Type: IS - Integrated - Bottom Head Tube Inside Dia.: 52.1mm - Crown Race Seat Dia.: 39.79mm - Crown Race Type: Aluminum, Dual-Seal - Bottom Stack Height: 1mm - Bottom Bearing Type: Top-quality, sealed stainless steel bearings - Material: N/A - Weight: 79.48 grams
$143.99
Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Integrated bearings fit directly into compatible head tubes without the need of a bearing press. - Sealed stainless steel bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - 7075 T-6 aluminum cups machined in Fletcher, NC - Aluminum dual seal crown race protects lower bearing - Interlok spacer compatible - 110 year warranty
$99.99 - $116.99
Hellbender 70 Lite headset.
$99.99 - $116.99
Hellbender 70 Slam headset.
$90.00 - $110.00
Cane Creek headsets with Hellbender stainless steel bearings with increased sealing elements and more grease in relation to the comparable 110 bearing. - Designed to bridge the gap between the 40-series and 110-series headsets
$99.99
There is more to our carbon headsets than their striking good looks. From top to bottom, Box One™ Carbon Headsets was designed to perform. Each unit features a custom CNC-machined aluminum compression cap in the shape of the Box logo with cut-outs to reduce weight. At the center of the compression cap is an anodized aluminum bolt that threads into a gold anodized aluminum expander plug. This expander eliminates the need for a star nut and works with all 1-1/8-inch steerer tubes—even carbon fiber steerer tubes. The bearing cover is crafted from carbon fiber, which not only adds style but helps shave weight. At the heart of the headset are two super-smooth, titanium-nitride coated, sealed, 45×45 bearings. The titanium coating results in a low friction coefficient, increased corrosion resistance, and smoother rolling bearings. A split crown race makes installation and removal from forks super easy. FEATURES - Durable Titanium-Nitride Coated Sealed Bearings - Lightweight Non-Structural Carbon Components - Reusable Expander Wedge SPECIFICATIONS - Bearing Angle: 45° x 45° - Compression Cap: CNC-Machined - Bearing Cover: Carbon Fiber - Expansion Plug: Aluminum - Compression Cap: Aluminum - Finish: TiN Bearings - IS 42/28.6 - IS 42/28.6 - Weight 94 g / 3.3 oz
$84.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS44/28.6|EC44/40 • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 44.0mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 8mm • Top Bearing Type: Black Oxide, Sealed • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 44.0mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum
$82.99
- Carbon fiber top cover - Upper: Campagnolo angular contact bearings (black seal) - 1-1/8-inch, 45 degrees/ 45 degrees ACB upper - 1.5-inch, 36 degrees/ 45 degrees ACB lower - For tapered 46mm/56mm OD headtube - For 1-1/8-inch to 1.5-inch tapered fork
$78.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS44/28.6/H8/K|ZS56/40/H4/K • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 44.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 8mm • Top Bearing Type: Black Oxide, Sealed • Bottom Type: ZS - ZeroStack • Bottom Head Tube Inside Dia.: 55.95mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 4mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 109g
$78.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)
$74.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS44/28.6/H8/K|ZS56/30/H4/K • Top Type: ZS - Zero Stack Cup • Top Head Tube Inside Dia.: 44.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 8mm • Top Bearing Type: Black Oxide, Sealed • Bottom Type: ZS - ZeroStack • Bottom Head Tube Inside Dia.: 55.95mm • Crown Race Seat Dia.: 20.015mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 4mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 97g
$71.99
Origin8's Twistr Semi-Integrated & External Headset features highly polished sealed angular contact premium bearings ensure smooth operation. Its CNC-machined AL6061 top cover is sealed to keep moisture and grit away from the bearings, while the CNC-machined AL7075 crown race protects the lower bearings and fork. - AL6061 top cap - Forged stainless steel bolt - Includes star nut
$69.99
Cane Creek compatible integrated style bearings fit directly into headtube. - Crown Race: 30 - S.H.I.S. Lower: IS41 - S.H.I.S. Upper: IS41 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
$69.99
FSA Orbit MX threadless headset features TH brand 36-degree angular contact sealed bearings. - Forged and CNC machined 6061/T6 aluminum cups - Patented alignment tip for increased durability and performance - TH Brand 36-degree Angular Contact sealed bearings - 7075 alloy crown race - Laser etched aluminum top cap - EC34/28.6 (36x36) | EC34/30 (36x36)
$69.99
The FSA Orbit X threadless headset is constructed of aluminum and features sealed cartridge bearings. - Classic shape with modern styling for high-end road bikes - For threadless steerers - Forged and CNC machined 6061/T6 aluminum cups - Patented alignment tip for increased durability and performance - TH brand 36-degree Micro Angular Contact Bearings (red seal) - Laser etched aluminum top cap - Weight: 82g
$69.99
Origin-8's SSR Threadless Headset is for 1 1/8-inch threadless forks. It features CNC machined 7075-aluminum cups and stainless-steel cartridge bearings for excellent performance and long life. It also comes in many colors to customize your ride. - 93g including star nut and laser top cap - Stack Height: 28.5mm **Anodized colors will vary from batch to batch and may not match exactly - S.H.I.S.: EC34/28.6|EC34/30
$59.99 - $69.99
Origin8's Twistr Semi-Integrated Headset features highly polished sealed angular contact premium bearings ensure smooth operation. Its CNC-machined AL6061 top cover is sealed to keep moisture and grit away from the bearings, and the CNC-machined AL7075 crown race protects the lower bearings and fork. - AL6061 top cap - Forged stainless steel bolt - Includes star nut
$69.00
- 1-1/8" / 1-1/4", 45°/ 45° ACB - Compatible with carbon or alloy head tubes - For tapered 47mm / 52mm OD head tube - For 1-1/8" to 1-1/4" tapered fork - Alloy top cover - Upper : 1-1/8" angular contact bearing black seal) - Lower : 1-1/4" angular contact bearing (black seal) - Stack height 15.6+1=16.6mm - 74 grams
$68.00
-Tapered OD2 MTB headset (2012-2016)
$63.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS41/28.6/H9/K|IS52/40/H1 • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 41.1mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Bottom Type: IS - Integrated • Bottom Head Tube Inside Dia.: 52.1mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 1mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 87g
$63.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
$63.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Integrated bearings fit directly into compatible head tubes without the need of a bearing press. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Uses 36/45 degree crown race and compression ring - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)
$63.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability, and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Integrated bearings fit directly into compatible head tubes without the need of a bearing press. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Uses 36/45 degree crown race and compression ring - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)
$63.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
$63.99
Service and replacement parts specifically for Trek Knock Block technology. Genuine replacement parts Get your bike back on the trail with the headset parts you need. - Trek proprietary headset components compatible with Trek Knock Block models - 58-degree headset fits all 2017-2020 Knock Block equipped models - Includes crown race, bearings, top cover, frame chip & fastener - Frame chip has display tabs to connect Bosch Kiox Mount sold separately - Must be paired with Knock Block stem and Knock Block spacers - Knock Block headset spacers not included
$63.99
Trek proprietary headset components are compatible with Trek Knock Block models. Service and replacement parts specifically for Trek Knock Block Technology. PRODUCT DETAILS - Compatible with all Trek Knock Block models - Includes crown race, bearings, top cover, frame chip & fastener - Must be paired with Knock Block stem and Knock Block spacers - Knock Block headset spacers not included
$63.99
Service and replacement parts specifically for Trek Knock Block technology. Get your bike back on the trail with the headset parts you need. PRODUCT DETAILS - Trek proprietary headset components compatible with Trek Knock Block models - 62-degree headset fits 2020 & 2021 Supercaliber and 2021 Procaliber - Includes crown race, bearings, top cover, frame chip & fastener - Frame chip has display tabs to connect Bosch Kiox Mount sold separately - Must be paired with Knock Block stem and Knock Block spacers - Knock Block headset spacers not included
$63.99
Service and replacement parts specifically for Trek Knock Block technology. Genuine replacement parts Get your bike back on the trail with the headset parts you need. - Trek proprietary headset components compatible with Trek Knock Block models - 72-degree headset fits 2021 Slash 29 - Includes crown race, bearings, top cover, frame chip & fastener - Frame chip has display tabs to connect Bosch Kiox Mount sold separately - Must be paired with Knock Block stem and Knock Block spacers - Knock Block headset spacers not included
$26.00 - $62.00
- Pig DH-Pro feature angular contact sealed upper bearing and an industrial cartridge sealed bearing with an alloy upper cup and CrMo lower cup - Pig feature oversized 1/4" lower ball bearings, 5/32" upper bearings - Big Fat Pig feature super oversized caged ball bearings - Pig: External Cup, traditional - Pig S.H.I.S.: EC34/28.6|EC34/30 - Big Fat Pig S.H.I.S.: EC49/38.1|EC49/40 - Pig DH Pro S.H.I.S.: EC34/28.6|EC34/30 - Stack: 15.4mm/13.6mm (Pig), 17mm/11.7mm (Big Fat Pig), 15.5mm/16mm (Pig DH Pro) - Color: Black - Weight: 193g (Pig), 345g (Big Fat Pig), 198g (Pgi DH Pro)
$59.99
All Box headsets are engineered and crafted using our Oversized Technology. As we follow the load paths down the handlebars, through the stem-to-bar interface, we arrive at the headset focal point. Since any steering stiffness can easily be lost to headset play, we have concentrated our attention on manufacturing tolerances and quality of materials for the bearing, CNC bearing cover, and crown race. Now that this junction is steadfast you can rest assured that your cockpit’s steering stiffness will transfer onto the fork. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: In this particular model headset we’ve gone to a 1.5” bottom race to fill a tapered head tube. This mates with our oversized X5 carbon fork. Larger and smoother contact areas spread the load effectively and counteract flex. FEATURES - Oversized Technology™ - Massive 1.5” Diameter - Massive Sealed Bearings - Star-Nut Compression System - Includes 1-?” Reducer Race for 1-1/8” Steerer Tube COMPATIBILITY - Box One X5 Fork - Box One X2 Fork - Box One XL Fork - Frames with an Integrated NON-Tapered Head Tube
$54.99 - $59.99
Hellbender 70 Slam Top Assembly headset.
$59.99
- Bearing Type: Cartridge - Weight: 125g - Crown Race: 40 - S.H.I.S. Lower: ZS56 - S.H.I.S. Upper: ZS44 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
$59.95 - $59.99
Wolf Tooth headsets are machined here in our Minnesota shop with aircraft-grade 6061 aluminum. They are designed to be lightweight, strong, and durable. Our headsets have three levels of industry-leading custom sealing to protect bearings from the elements and prolong the life of the headset. Available in a variety of colors. These IS headsets are for frames with molded-in internal bearing cups. Premium Headsets with Enduro stainless steel bearings have a lifetime warranty. Upper assembly features: - Ultralight Stem Cap with Integrated Spacer plus an aluminum bolt and a star nut. - 7, 15, and 25mm stack height top cover options (7mm cover = 8mm total stack, 15mm cover = 15mm total stack, 25mm cover = - 25mm total stack. - O-ring seal prevents water intrusion around the steerer tube. - Custom-molded upper lip seal provides additional protection for the upper bearing. - bearing top cap outer diameter 45.8 mm
$59.95
Wolf Tooth Precision Headsets for Trek Knock Block are machined in the USA out of aircraft grade aluminum with superior sealing for protection against the elements. Available in a variety of colors to add some style to your bike. These upper headsets are for Trek frames with molded-in internal bearing cups. - Designed to work with Trek's Knock Block system - The top cap on these headsets have unique raised features that key to Knock Block compatible stems (made by Bontrager - If spacers are needed, you will need to use special Knock Block compatible spacers with notch features - This product is the upper headset only - Lower headsets on bikes with Knock Block do not have any unique features. They are usually IS headsets which are available separately
$52.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
$52.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
$52.99
Get back on the trail with a replacement headset assembly for your Session. Original replacement headset assembly for your Session. PRODUCT DETAILS - Complete headset assembly - Degree offset headset is stock on Session models - Only for use on 2018+ Session Carbon models
$52.99
Genuine FSA replacement headsets. Genuine Replacement Parts Get your bike back on the trail with the headset parts you need. - Complete headset assembly includes 1.5" crown race - For use with 44mm upper ID and 56mm lower ID frames
$39.09 - $49.99
The Origin8 Twistr Integrated Headset features highly polished sealed angular contact premium bearings ensure smooth operation. Its CNC-machined AL6061 top cover is sealed to keep moisture and grit away from the bearings, while the CNC-machined AL7075 crown race protects the lower bearings and fork. - AL6061 top cap - Forged stainless steel bolt - Includes star nut
$48.99
• Sealed cartridge bearings • CNC machined 6061-T6 aluminum cups with laser etched logos • 26.4mm & 27.0mm races included • S.H.I.S.: EC30/25.4-24tpi|EC30/26 • Steerer Diameter: 25.4mm • Cup Diameter: 30.2mm • Race Diameter: 26.4mm • Stack Height: 42.5mm • Size: 1-inch • Black or Silver • Weight: 110g including lock nut
$39.99 - $48.99
Origin-8's Pro Fit Threadless Headset is made of light and durable aluminum and boasts smooth and long-lasting sealed cartridge bearings. It also sports nice laser-etched logos.
$47.99
Authentic replacement Trek parts. Genuine replacement parts Get your bike back in action with a quality replacement headset. - 1-1/2in. Lower bearing - Angular contact bearings
$46.99
- Bearing Type: Cartridge - Weight: 86 g - Crown Race: 40 - S.H.I.S Lower: IS52 - S.H.I.S Upper: IS42 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
$44.99
Box Two™ Integrated headsets feature an aluminum top cap, CNC-machined bearing cover, and split crown race with super-smooth rolling, precision 45x45 bearings. FEATURES - Precision Sealed Bearings IMPORTANT NOTES This headset was designed to allow 1-inch forks with frames that have 1-1/8-inch integrated head tubes. COMPATIBILITY - Box One XS Fork - Box One XE Fork - Box One Stem Lock - Frames with a 1" Integrated NON-Tapered Head-Tube
$44.99
Box Two™ Integrated headsets feature an aluminum top cap, CNC-machined bearing cover, and solid crown race with super-smooth rolling, angular contact bearings. FEATURES - Precision Sealed Bearings COMPATIBILITY - Box One XS Fork - Box One XE Fork - Box One Stem Lock - Frames with a 1" Integrated NON-Tapered Head-Tube
$44.00
Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out. • Technical Description: EC34/28.6/H16/K|EC34/30 /H12/K • Top Type: EC - External Cup • Top Head Tube Inside Dia.: 33.95mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 16mm • Top Bearing Type: Black Oxide • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 33.95mm • Crown Race Seat Dia.: 30.015mm • Crown Race Type: Polymer • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide • Material: 6061 aluminum • Weight: 88.29g
$41.99
Genuine replacement parts Get back on the road with a genuine replacement headset. Designed for use with internal cable routing - Includes lower and upper bearing - Includes headset compression ring - Compression ring is stackable with Allant+ 9.9 / Zouma Supreme+ Top cap and Spacers
$41.99
The FSA Orbit Z headsets feature a very low-profile design primarily for ATB and are compatible with Cane Creek internal style headsets. - "Zero-Stack"/Cane Creek compatible - Very low profile designed primarily for Mountain Bikes - Patented alignment tip for increased durability and performance - TH brand 36-degree Micro Angular Contact Bearings (red seal) - 7075 alloy crown race - Laser etched aluminum top cap
$40.99
A solid choice for 1-1/8in frames, the Orbit Equipe features a sturdy steel lower cup for maximum durability. The top cup is forged alloy, with an alloy top cover. Inside are two low maintenance, easy-to-replace sealed cartridge angular contact bearings. - Bearing Type: Cartridge - Weight: 117g - Crown Race: 30 - S.H.I.S. Lower: EC34 - S.H.I.S. Upper: EC34 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
$39.99
- No. series headsets offer excellent performance and value - No. 8b: 36x45 degree Cane Creek Integrated, or No. 10: Zero Stack shallow available for 1-1/8" applications - No. 10 S.H.I.S.: ZS44/28.6|ZS44/30 - No. 8B S.H.I.S.: IS42/28.6|IS42/30 - Stack: 5.2mm/3.7mm (No. 10), 8mm/1mm (No. 8B) - Color: Black - Weight: 93g (No. 10), 74g (No. 8B)
$39.99
- Steerer outer diameter: 28.6mm (1-1/8") - Crown race inner diameter: 30mm - Cup Insertion OD: Integrated - Stack height: 15.7mm - Bearing Type: Sealed - Headset type upper: Unthreaded fully integrated - Headset type lower: Fully integrated - Material: Aluminum
$36.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS41/28.6/H9/K • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 41.1mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 37g
$34.00
Replacement headset uppers from FSA - Internal HS Upper Orbit-Z - Steerer diameter: 1-1/8" - ZS44/28.6 (36 x 45) - 5.3/13.1mm
$32.99
Cane Creek compatible integrated style bearings fit directly into headtube. - 36-degree inner chamfer and 45-degree outer chamfer - Crown Race: 30 - S.H.I.S. Lower: IS41 - S.H.I.S. Upper: IS41 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
$31.99
High-quality replacement headset bearings are smooth like butter. - Sealed cartridge bearing for long life - Durable steel bearing housing
$29.99
• Includes carbon top cap, as well as 2x3mm, 3x5mm and 3x10mm spacers to dial in your fit
Page 1 of 2 Next page