Tires/Tubes

When bite and traction are required above all else, the Gnarwhal keeps you moving. Roll through the roughest terrain and deepest snow with the stud-ready aggressively treaded Gnarwhal. Key features - Excels in snow, ice, and slippery terrain - Tubeless Ready (TLR) for easy tubeless setup and puncture protection - Inner Strength casing is lightweight sidewall protection that's supple and strong - Studdable design allows for added traction in icy conditions - Easy install of available Bontrager Tire Studs with Bontrager Tire Stud Tool

- Aggressive Tread Design - Enhanced Steering Performance - Off Camber Grip - Low Rolling Resistance - Excellent Float - Great for blocked trails or loose snow - 240 studs

- Aggressive Tread Design - Enhanced Steering Performance - Off Camber Grip - Low Rolling Resistance - Excellent Float - Great for blocked trails or loose snow - 240 studs

- Studded tire for added traction when conditions get icy - Weight optimized 120tpi casing, Silica rubber, max tire pressure 20psi - Tubeless ready bead/casing

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert; allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 2.1 – 2.6" and rims with internal width 22 – 35mm Includes: - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert, allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 33 – 46mm and inner rim widths 19 – 26mm Includes - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert; allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 2.6 – 3.0" and rims with internal width 32 – 45mm Includes - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions

THE FAT BIKE TIRE. - Extremely light. - The large volume can be ridden with extremely low air pressure. - Ideal on deep soils, rough and very loose terrain. - Available in widths of 100, 110 or 120 millimetres

- Well-spaced and siped lugs help keep rolling resistance at a minimum even while running low air pressure - Large siping of lugs provides additional grip in sand, snow, and other unfavorable conditions - Staggered corner lugs provide a stable and predictable turning platform - Available in 120 TPI for a supple, obstacle conforming tire, or 30 TPI for a durable yet forgiving casing

The ‘turbo’ of spike tires. With 361 spikes it bites firmly into icy roads. The tungsten carbide core of each spike is clad in weight-saving aluminum. The scales stop at 695 g, yet the tire remains agile and sporty. - Schwalbe's Performance line of tires offers excellent quality and the best value for an intensive-use tire.

- THE FAT BIKE TIRE. - Extremely light. - The large volume can be ridden with extremely low air pressure. - Ideal on deep soils, rough and very loose terrain. - Available in widths of 100, 110 or 120 millimetres

The small white-furred, long-bearded men with enormous feet of Swiss folklore, a Barbegazi only emerge from their cave after the first snowfall. The aptly-named, ultra-fat, Tubeless Ready, Barbegazi TLR gives you the float and traction to take on any winter trail. 4.7 inches of aggressive tread floats over and bites into everything in its path. - Excels in deep snow, sand, and rough terrain - Tubeless Ready (TLR) for easy tubeless setup and puncture protection - Inner Strength casing is lightweight sidewall protection that's supple and strong

Bigger feet for when the snow is deep. The small white-furred, long-bearded men with enormous feet of Swiss folklore, Barbegazi only emerge from their cave after the first snowfall. The aptly-named, ultra-fat, Tubeless Ready, Barbegazi TLR gives you the float and traction to take on any winter trail. 4.7 inches of aggressive tread floats over and bites into everything in its path. - A fat bike tire that excels in deep snow, sand, and rough terrain - Tubeless Ready (TLR) for easy tubeless setup and puncture protection - Supple and strong Inner Strength casing provides lightweight sidewall protection - Lightweight 120 TPI casing provides great ride feel and tire performance - Maximum pressure: 20psi - ETRTO: 114-584 - Weight: 1240g

Go slashing through the snow. When bite and traction are required above all else, this tire keeps you moving. Roll through the roughest terrain and deepest snow with the stud-ready, aggressively treaded Gnarwhal. Available to fit both 26 and 27.5 wheels, this versatile tire can be ridden with or without studs to add traction to even the slipperiest winter riding conditions. - A fat bike tire that excels in snow, ice, and slippery terrain - Aggressive and siped tread provides traction in even the slickest conditions - Tubeless Ready (TLR) for easy tubeless setup and puncture protection - Inner Strength casing is lightweight sidewall protection that's supple and strong - Studdable design allows for added traction in icy conditions - Easy install of available Bontrager Tire Studs with Bontrager Tire Stud Tool - 27.5" tires can accept 216 studs - 120 TPI - Maximum pressure: 20psi - ETRTO: 114-584 - Weight: 1515g

Named for the folkloric creature native to oft snow-laden Rhinelander, WI, Hodag covers all your fat tire bike needs in a lightweight Tubeless Ready tread. Designed for all-terrain use, Hodag stays true to its sharp-clawed namesake with unmatched traction and excels in throwing snow, loose dirt, and sand, keeping your ride the stuff of legend. Key features - Excels in snow and sand - Tubeless Ready (TLR) for easy tubeless setup and puncture protection - Inner Strength casing is lightweight sidewall protection that's supple and strong

Schwalbe's Ice Spiker Performance Line tire is the "turbo" of studded tires. It sports 361 spikes that bite firmly into icy roads. The tungsten carbide core of each spike is clad in weight-saving aluminum. The Ice Spiker is the best way to be agile and sporty while staying upright when the roads ice over. Note: In order to ensure that spikes are permanently fixed, tires should be run in for about 25 miles (40km) on asphalt, while avoiding any fast acceleration or heavy braking.

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

The Minion DHF has become the benchmark for riders wanting maximum control in loose and muddy conditions. - Directional ramped center knobs provide low rolling resistance - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium, wet

With a tread design that deftly balances rolling speed with braking and cornering traction, it’s no wonder why the Minion DHF is one of the most imitated tires in mountain biking. Whether riding local trails, a backcountry epic, racing enduro or World Cup downhill, there’s a Minion DHF spec to meet your needs.

Built with Kevlar to deliver faster and stronger seals, FiberLink represents a new standard for tubeless bicycle tire sealant. Developed with Finish Line's proprietary FiberLink Technology, this groundbreaking pro latex formula seals quickly, ensures maximum seal integrity and delivers optimum longevity. - FiberLink Technology utilizes Kevlar fibers that work synergistically with fast-acting natural latex to seal punctures as they occur. Free-flowing latex cures rapidly to create an adhesive seal which is reinforced with interlinking Kevlar fibers - Low viscosity is ideal for race conditions - Fast-acting natural latex reduces air loss - Optimum longevity between refresh cycles - Low odor and easy to setup - 8oz Drip Bottle

The Strada is Challenge's go to tire for long days on the road. This all-condition tire combines a round profile that takes the sting out of rough pavement with a construction that provides maximum control and low rolling resistance. This tire takes tubeless to a higher performance level by combining TLR's properties with a handmade construction for the ultimate in traction and ride quality. This tire includes PPS Ganzo, a lightweight and supple Puncture Protection System placed between the tread and casing to increase resistance to punctures. And puncture protection is enhanced when combined with the appropriate tubeless sealant. 260TPI SuperPoly casing.

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

The second generation of the legendary High Roller - Easily clears debris - Open tread design - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims An open and aggressive tread design gives the High Roller II excellent soil penetration and mud-clearing ability. A square profile provides a solid, consistent feel across the knobs. Modified knobs on the shoulder and center improve braking performance and traction on hard surfaces. An excellent choice for technical, loose terrain.

- The DHF incorporates ramped knobs for low rolling resistance and channel-cut knobs to increase gripping edges, giving straight-line control and precise cornering. - The reference in Downhill and Trail tires - Front specific design, but the DHF also makes an excellent option for a rear tire, with its balanced driving, braking, and cornering traction - Plus sizes available - Wide Trail casing optimized for 30—35mm rims

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims - DH casing features 2 ply 60 TPI construction with a butyl reinforced sidewall for maximum durability With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims - DH casing features 2 ply 60 TPI construction with a butyl reinforced sidewall for maximum durability With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Aggressive plus tire inspired by the Ikon+ - 27.5+ tire - Designed for aggressive XC trails The Rekon+ is an aggressive trail tire inspired by the Ikon+ for intermediate and technical terrain. Wide knobs down the middle provide control under braking, and L-shaped side knobs ensure support when carving loose turns. With confidence like this you can race more and scout less with the Rekon+.